Nastavitve tablice¶
- Tablica
Input Pressure Global Curve : This is the global curve setting that your tablet will use in Krita. The settings here will make your tablet feel soft or hard globally.
- Uporabite dogodke miške za desni in srednji klik.
Some tablet devices don’t tell us whether it has side buttons on a stylus. If you have such a device, you can try activate this workaround. Krita will try to read right and middle-button clicks as if they were coming from a mouse instead of a tablet. It may or may not work on your device (depends on the tablet driver implementation). After changing this option Krita should be restarted.
Novo v verziji 4.2.
- Uporabi časovne žige gonilnika tablice za hitrost čopiča
S tem se spremeni način glajenja prostoročnega čopiča v Kriti z uporabo časovnih žigov gonilnika namesto časovnika.
Novo v verziji 5.0.
- Največja hitrost čopiča
To določa, kaj naj Krita upošteva največjo hitrost čopiča. Največjo vrednost lahko najdete z uporabo preizkuševalnika za grafične tablice.
Novo v verziji 5.1.
- Hitro glajenje čopiča
With some devices the speed samples can be very erratic. This can be reduced by instead of using each sample on its own, several samples are compared to find a smoother value. This controls how many speed samples should be taken into account. Note that too many samples can result in the loss of subtle speed changes.
Novo v verziji 5.1.
- Za Krita 3.3 ali kasnejše: API tabličnega vnosa
Samo v sistemih Windows 8 ali novejših.
- WinTab
Za prejemanje vnosa peresa grafične tablice uporabite API WinTab. To je API, uporabljen pred Krito 3.3. Ta možnost je priporočljiva za večino tablic Wacom.
- Vnos kazalca za Windows 8+
Use the Pointer Input messages to receive tablet pen input. This option depends on Windows Ink support from the tablet driver. This is a relatively new addition so it’s still considered to be experimental, but it should work well enough for painting. You should try this if you are using an N-Trig device (e.g. recent Microsoft Surface devices) or if your tablet does not work well with WinTab.
Napredne nastavitve grafične tablice za WinTab¶
When using multiple monitors or using a tablet that is also a screen, Krita will get conflicting information about how big your screen is, and sometimes if it has to choose itself, there will be a tablet offset. This window allows you to select the appropriate screen resolution.
- Uporabi informacije, ki jih zagotavlja grafična tablica
Uporabi informacije, ki jih zagotavlja grafična tablica.
- Preslikaj na celoten navidezni zaslon
Uporabite informacije, kot jih nudi sistem Windows.
- Preslikaj v področje po meri
Vnesite številke ročno. Uporabite to, ko ste že neuspešno poskusili z drugimi možnostmi. Če je tako, boste morda morali narediti nekaj poskusov, vendar lahko vsaj prilagajate to vrednost.
If you have a dual monitor setup and only the top half of the screen is reachable, you might have to enter the total width of both screens plus the double height of your monitor in this field.
Novo v verziji 4.2: To access this dialog in Krita versions older than 4.2, you had to do the following:
Postavite svoje pisalo stran od tablice.
Zaženite Krito brez uporabe pisala, t.j. z uporabo miške ali tipkovnice.
Pritisnite dvigalko in jo držite.
Tablice se dotaknite s pisalom, da ga bo Krita prepoznala.
If adjusting this doesn’t work, and if you have a Wacom tablet, an offset in the canvas can be caused by a faulty Wacom preference file which is not removed or replaced by reinstalling the drivers.
To fix it, use the “Wacom Tablet Preference File Utility” to clear all the preferences. This should allow Krita to detect the correct settings automatically.
Opozorilo
Clearing all wacom preferences will reset your tablet’s configuration, thus you will need to recalibrate/reconfigure it.
Preizkuševalnik tablice¶
Novo v verziji 4.1.
This is a special feature for debugging tablet input. When you click on it, it will open a window with two sections. The left section is the Drawing Area and the right is the Text Output.
If you draw over the Drawing Area, you will see a line appear. If your tablet is working it should be both a red and blue line.
The red line represents mouse events. Mouse events are the most basic events that Krita can pick up. However, mouse events have crude coordinates and have no pressure sensitivity.
The blue line represents the tablet events. The tablet events only show up when Krita can access your tablet. These have more precise coordinates and access to sensors like pressure sensitivity.
Pomembno
If you have no blue line when drawing on the lefthand drawing area, Krita cannot access your tablet. Check out the page on drawing tablets for suggestions on what is causing this.
Ko narišete črto, bo izhod na desni prikazal vse vrste izhoda besedila. Ta izhod besedila je mogoče priložiti zahtevi za pomoč ali poročilu o napakah, da ugotovite, kaj se dogaja.