Mix¶

알라논¶

힌트

This blending mode is called “Allanon” in English.

Blends the upper layer as half-transparent with the lower. (It adds the two layers together and then halves the value).

../../_images/Blending_modes_Allanon_Sample_image_with_dots.png — Left: **Normal**. Right: **Allanon**.¶

보간¶

힌트

This blending mode is called “Interpolation” in English.

Subtract 0.5f by 1/4 of cosine of base layer subtracted by 1/4 of cosine of blend layer assuming 0-1 range. The result is similar to Allanon mode, but with more contrast and functional difference to 50% opacity.

../../_images/Blending_modes_Interpolation_Sample_image_with_dots.png — Left: **Normal**. Right: **Interpolation**.¶

보간 - 2X¶

힌트

This blending mode is called “Interpolation - 2X” in English.

Applies Interpolation blend mode to base and blend layers, then duplicates to repeat interpolation blending.

../../_images/Blending_modes_Interpolation_X2_Sample_image_with_dots.png — Left: **Normal**. Right: **Interpolation - 2X**.¶

알파 어둡게¶

힌트

This blending mode is called “Alpha Darken” in English.

As far as I can tell this seems to premultiply the alpha, as is common in some file-formats.

../../_images/Blending_modes_Alpha_Darken_Sample_image_with_dots.png — Left: **Normal**. Right: **Alpha Darken**.¶

뒤로¶

힌트

This blending mode is called “Behind” in English.

Does the opposite of Normal, and tries to have the upper layer rendered below the lower layer.

../../_images/Blending_modes_Behind_Sample_image_with_dots.png — Left: **Normal**. Right: **Behind**.¶

Erase¶

힌트

This blending mode is called “Erase” in English.

This subtracts the opaque pixels of the upper layer from the lower layer, effectively erasing.

../../_images/Blending_modes_Erase_Sample_image_with_dots.png — Left: **Normal**. Right: **Erase**.¶

기하 평균¶

힌트

This blending mode is called “Geometric Mean” in English.

This blending mode multiplies the top layer with the bottom, and then outputs the square root of that.

../../_images/Blending_modes_Geometric_Mean_Sample_image_with_dots.png — Left: **Normal**. Right: **Geometric Mean**.¶

그레인 추출¶

힌트

This blending mode is called “Grain Extract” in English.

Similar to Subtract, the colors of the upper layer are subtracted from the colors of the lower layer, and then 50% gray is added.

../../_images/Blending_modes_Grain_Extract_Sample_image_with_dots.png — Left: **Normal**. Right: **Grain Extract**.¶

그레인 병합¶

힌트

This blending mode is called “Grain Merge” in English.

Similar to Addition, the colors of the upper layer are added to the colors, and then 50% gray is subtracted.

../../_images/Blending_modes_Grain_Merge_Sample_image_with_dots.png — Left: **Normal**. Right: **Grain Merge**.¶

Greater¶

힌트

This blending mode is called “Greater” in English.

A blending mode which checks whether the painted color is painted with a higher opacity than the existing colors. If so, it paints over them, if not, it doesn’t paint at all.

Hard Mix¶

힌트

This blending mode is called “Hard Mix” in English.

Similar to Overlay.

Mixes both Color Dodge and Burn blending modes. If the color of the upper layer is darker than 50%, the blending mode will be Burn, if not the blending mode will be Color Dodge.

../../_images/Blending_modes_Hard_Mix_Sample_image_with_dots.png — Left: **Normal**. Right: **Hard Mix**.¶

강한 섞기(Photoshop)¶

힌트

This blending mode is called “Hard Mix (Photoshop)” in English.

This is the Hard Mix blending mode as it is implemented in Photoshop.

../../_images/Krita_4_0_hard_mix_ps.png — **Left**: Dots are mixed in with the normal blending mode, on the **Right**: Dots are mixed in with hardmix.¶

This add the two values, and then checks if the value is above the maximum. If so it will output the maximum, otherwise the minimum.

Hard Mix Softer (Photoshop)¶

힌트

This blending mode is called “Hard Mix Softer (Photoshop)” in English.

버전 5.0에 추가.

This is the Hard Mix blending mode as it is implemented in Photoshop for texturing brushes. It produces softer edges than the normal Hard Mix (Photoshop).

../../_images/Blending_modes_Hard_Mix_Softer_Photoshop_Sample_image_with_dots.png — **Left**: Dots are mixed in with the normal blending mode, on the **Right**: Dots are mixed in with hard mix softer.¶

This is like the Inverse Subtract mode but the two terms are scaled up to increase the contrast. This is not really a Hard Mix mode in the sense that it doesn’t choose between a result or another based on a threshold, although in most cases the result looks like the normal Hard Mix (Photoshop) but with softer edges.

강한 오버레이¶

힌트

This blending mode is called “Hard Overlay” in English.

버전 4.0에 추가.

Similar to Hard Light but Hard Light use Screen when the value is above 50%. Divide gives better results than Screen, especially on floating point images.

../../_images/Blending_modes_Hard_Overlay_Sample_image_with_dots.png — Left: **Normal**. Right: **Hard Overlay**.¶

Normal¶

힌트

This blending mode is called “Normal” in English.

As you may have guessed this is the default Blending mode for all layers.

In this mode, the computer checks on the upper layer how transparent a pixel is, which color it is, and then mixes the color of the upper layer with the lower layer proportional to the transparency.

../../_images/Blending_modes_Normal_50_Opacity_Sample_image_with_dots.png — Left: **Normal** 100% Opacity. Right: **Normal** 50% Opacity.¶

Overlay¶

힌트

This blending mode is called “Overlay” in English.

A combination of the Multiply and Screen blending modes, switching between both at a middle-lightness.

Overlay checks if the color on the upper layer has a lightness above 0.5. If so, the pixel is blended like in Screen mode, if not the pixel is blended like in Multiply mode.

This is useful for deepening shadows and highlights.