Introduction to Krita coming from Paint Tool SAI

Kako to storimo v Kriti?

This section goes over the functionalities that Krita and Paint Tool SAI share, but shows how they slightly differ.

Krmarjenje po platnu

Krita, just like SAI, allows you to flip, rotate and duplicate the view. Unlike SAI, these are tied to keyboard keys.

Zrcali

This is tied to M key to flip.

Zavrti

There’s a couple of possibilities here: either the 4 and 6 keys, or the Ctrl + [ and Ctrl + ] shortcuts for basic 15 degrees rotation left and right. But you can also have more sophisticated rotation with the Shift + Space + drag or Shift + mousemiddle + drag shortcuts. To reset the rotation, press the 5 key.

Povečava

You can use the + and - keys to zoom out and in, or use the Ctrl + mousemiddle shortcut. Use the 1, 2 or 3 keys to reset the zoom, fit the zoom to page or fit the zoom to page width.

You can use the Overview docker in Settings ‣ Dockers to quickly navigate over your image.

You can also put these commands on the toolbar, so it’ll feel a little like SAI. Go to Settings ‣ Configure Toolbars… menu item. There are two toolbars, but we’ll add to the Main Toolbar.

Then, you can type in something in the left column to search for it. So, for example, ‚undo‘. Then select the action ‚undo freehand stroke‘ and drag it to the right. Select the action to the right, and click Change text. There, toggle Hide text when toolbar shows action alongside icon to prevent the action from showing the text. Then press OK. When done right, the Undo should now be sandwiched between the save and the gradient icon.

You can do the same for Redo, Deselect, Invert Selection, Zoom out, Zoom in, Reset zoom, Rotate left, Rotate right, Mirror view and perhaps Smoothing: basic and Smoothing: stabilizer to get nearly all the functionality of SAI’s top bar in Krita’s top bar. (Though, on smaller screens this will cause all the things in the Brushes and Stuff Toolbar to hide inside a drop-down to the right, so you need to experiment a little).

Hide Selection, Reset Rotation are currently not available via the Toolbar configuration, you’ll need to use the shortcuts Ctrl + H and 5 to toggle these.

Opomba

Krita 3.0 currently doesn’t allow changing the text in the toolbar, we’re working on it.

Right click color sampler

You can actually set this in Settings ‣ Configure Krita… ‣ Canvas input settings ‣ Alternate invocation. Just double-click the entry that says Ctrl + mouseleft shortcut before Sample Foreground Color from Merged Image to get a window to set it to mouseright.

Opomba

Krita 3.0 actually has a Paint Tool SAI-compatible input sheet shipped by default. Combine these with the shortcut sheet for Paint Tool SAI to get most of the functionality on familiar hotkeys.

Stabilizator

This is in the tool options docker of the freehand brush. Use Basic Smoothing for more advanced tablets, and Stabilizer is much like Paint Tool SAI’s. Just turn off Delay so that the dead-zone disappears.

Prosojnost

So one of the things that throw a lot of Paint Tool SAI users off is that Krita uses checkers to display transparency, which is actually not that uncommon. Still, if you want to have the canvas background to be white, this is possible. Just choose Background: As Canvas Color in the new image dialogue and the image background will be white. You can turn it back to transparent via Image ‣ Image Background Color and Transparency… menu item. If you export a PNG or JPG, make sure to uncheck Store alpha channel (transparency) and to make the background color white (it’s black by default).

../../_images/Krita-color-to-alpha.png

Like SAI, you can quickly turn a black and white image to black and transparent with the Filter: Color to Alpha dialog under Filters ‣ Colors ‣ Color to Alpha… menu item.

Nastavitve čopiča

Another, somewhat amusing misconception is that Krita’s brush engine is not very complex. After all, you can only change the Size, Flow and Opacity from the top bar.

This is not quite true. It’s rather that we don’t have our brush settings in a docker but a drop-down on the toolbar. The easiest way to access this is with the F5 key. As you can see, it’s actually quite complex. We have more than a dozen brush engines, which are a type of brush you can make. The ones you are used to from Paint Tool SAI are the Pixel Brush (ink), The Color Smudge Brush (brush) and the filter brush (dodge, burn).

A simple inking brush recipe for example is to take a pixel brush, uncheck the Enable Pen Settings on opacity and flow, and uncheck everything but size from the option list. Then, go into brush-tip, pick Samodejni čopič from the tabs, and set the size to 25 (right-click a blue bar if you want to input numbers), turn on anti-aliasing under the brush icon, and set fade to 0.9. Then, as a final touch, set spacing to ‚auto‘ and the spacing number to 0.8.

You can configure the brushes in a lot of detail, and share the packs with others. Importing of packs and brushes can be done via the Settings ‣ Manage Resources…, where you can import .bundle or .kpp files.

Brisanje

Erasing is a blending mode in Krita, much like the transparency mode of Paint Tool SAI. It’s activated with the E key, or you can select it from the Blending Mode drop-down box.

Načini zlivanja

Krita has a lot of Blending modes, and thankfully all of Paint Tool SAI’s are amongst them except binary. To manage the blending modes, each of them has a little check-box that you can tick to add them to the favorites.

Multiple, Screen, Overlay and Normal are amongst the favorites. Krita’s Luminosity is actually slightly different from Paint Tool SAI’s, and it replaces the relative brightness of color with the relative brightness of the color of the layer.

SAI’s Luminosity mode (called Shine in SAI2) is the same as Krita’s Luminosity/Shine (SAI) mode, which is new in Krita 4.2.4. The SAI’s Shade mode is the same as Color Burn and Hard Mix is the same as the Luminosity and Shade modes.

Plasti

Zakleni kanal alfa

This is the checker box icon next to every layer.

Clipping group

For Clipping masks in Krita you’ll need to put all your images in a single layer, and then press the ‚a‘ icon, or press the Ctrl + Shift + G shortcut.

Plast črnila

This is a vector layer in Krita, and also holds the text.

Maske

These grayscale layers that allow you to affect the transparency are called transparency masks in Krita, and like Paint Tool SAI, they can be applied to groups as well as layers. If you have a selection and make a transparency mask, it will use the selection as a base.

Čiščenje plasti

This is under Edit ‣ Clear, but you can also just press the Del key.

Mešanje med dvema barvama

If you liked this docker in Paint Tool SAI, Krita’s Digital Color Selector docker will be able to help you. Dragging the sliders will change how much of a color is mixed in.

What do you get extra when using Krita?

Več prilagajanja čopičev

You already met the brush settings editor. Sketch brushes, grid brushes, deform brushes, clone brushes, brushes that are textures, brushes that respond to tilt, rotation, speed, brushes that draw hatches and brushes that deform the colors. Krita’s variety is quite big.

Več izbirnikov barv

You can have HSV sliders, RGB sliders, triangle in a hue ring. But you can also have HSI, HSL or HSY‘ sliders, CMYK sliders, palettes, round selectors, square selectors, tiny selectors, big selectors, color history and shade selectors. Just go into Settings ‣ Configure Krita… ‣ Color Selector Settings ‣ Color Selector tab, select an option in the Docker: drop-down box, to change the shape and type of your main color selector.

../../_images/Krita_Color_Selector_Types.png

You can call the color history with the H key, common colors with the U key and the two shade selectors with the Shift + N and Shift + M shortcuts. The big selector can be called with the Shift + I shortcut on canvas.

Geometrična orodja

Circles, rectangles, paths, Krita allows you to draw these easily.

Multibrush, Mirror Symmetry and Wrap Around

These tools allow you to quickly paint a mirrored image, mandala or tiled texture in no time. Useful for backgrounds and abstract vignettes.

../../_images/Krita-multibrush.png

Pomočniki

The painting assistants can help you to set up a perspective, or a concentric circle and snap to them with the brush.

Krita's vanishing point assistants in action.

Krita’s vanishing point assistants in action.

Zaklepanje plasti

Lock the layer with the padlock, so you don’t draw on it.

Hitri izbor plasti

If you hold the R key and press a spot on your drawing, Krita will select the layer underneath the cursor. Really useful when dealing with many layers.

Upravljanje z barvami

This allows you to prepare your work for print, or to do tricks with the LUT docker, so you can diagnose your image better. For example, using the LUT docker to turn the colors grayscale in a separate view, so you can see the values instantly.

../../_images/Krita-view-dependant-lut-management.png

Advanced Transform Tools

Not just rotate and scale, but also cage, wrap, liquify and non-destructive transforms with the transform tool and masks.

../../_images/Krita_transforms_liquefy.png

More Filters and non-destructive filter layers and masks

With filters like color balance and curves you can make easy shadow layers. In fact, with the filter layers and layer masks you can make them apply on the fly as you draw underneath.

../../_images/Krita_ghostlady_3.png

Pojavna paleta

This is the little circular thing that is by default on the right click. You can organize your brushes in tags, and use those tags to fill up the pop-up palette. It also keeps a little color selector and color history, so you can switch brushes on the fly.

../../_images/Krita-popuppalette.png

What does Krita lack compared to Paint Tool SAI?

  • Vektorske črte spremenljive širine

  • The selection source option for layers

  • Dynamic hard-edges for strokes (the fringe effect)

  • No mix-docker

  • No Preset-tied stabilizer

  • No per-preset hotkeys

Zaključek

I hope this introduction got you a little more excited to use Krita, if not feel a little more at home.